Connect with us


Add Tip
Add Tip

Everything You Wanted to Know About Tyres Fitting


There is a lot to think about when

There is a lot to think about when kitting out your car with tyres and it is important to get it right. After all, the tyres are the only part of the car that actually touch the ground! This article will guide you through the process of choosing and fitting tyres, so that you can be sure that your car is safe and roadworthy.

Fitting tyres is not as easy as it may look. There are a few things that you need to take into account in order to ensure that the process is done correctly. The first thing to consider when fitting Continental Tyres Milton Keynes is the size of the tyre. Make sure to measure the width and height of the tyre before purchasing it. You should also take into account the load capacity and speed rating when selecting a tyre.

Once you have chosen the right size tyre, it is time to install it. It is important to follow the manufacturer's instructions when installing tyres. In general, you will need to remove the old tyre, clean the rim, and then mount the new tyre. Make sure to use the proper tools and to torque the bolts correctly.

Fitting tyres is an important part of maintaining your vehicle. This will help to keep you safe on the road and extend the life of your tyres.

What to Look for When Choosing Tyres? 

The most important thing to consider when choosing Tyres Milton Keynes is safety. Tyres are responsible for keeping you firmly attached to the road, so it is crucial that they are in good condition. Here are some things to look out for when choosing tyres:

 Tread Depth: The tread on your Continental Tyres Milton Keynes helps to displace water on the road and provides grip.
 Age : Tyres have a “shelf life” of around six years, after which they start to degrade. 
 Damage : Look out for any cuts, cracks or bulges in the tyre as these can weaken the structure and cause a blowout. If you spot any damage, it is best to replace the tyre immediately.
How to Fit Tyres?

 You can do this yourself if you are confident in using a jack and wrench, or you can take them to a professional tyre fitter. Here is a quick guide to fitting tyres:

Park your car on a level surface and engage the handbrake.

Loosen the wheel nuts with a wrench before jacking up the car.

Remove the old tyre and fit the new one, making sure that it is correctly aligned.

Tighten the wheel nuts by hand and lower the car to the ground.

Use a torque wrench to tighten the wheel nuts to the correct setting.

Repeat this process for the remaining tyres.

And that’s it! You are now ready to hit the road with your new tyres. Just remember to check the tyre pressure regularly and keep an eye out for any signs of wear and tear.

After the  Tyres Milton Keynes is installed, you will need to inflate it to the proper pressure. You can find this information in the owner's manual or on the placard located on the doorjamb.

It is also important to check the tread depth regularly. The minimum tread depth is 2/32 of an inch. You can check the tread depth by inserting a penny into the tread groove. If you can see Abraham Lincoln's entire head, then the tread depth is too low and you will need to replace the tyre.

Conclusion:

Fitting tyres is an important part of maintaining your vehicle. This will help to keep you safe on the road and extend the life of your tyres. When choosing tyres, it is important to consider safety first. 

Make sure to check the tread depth, age and damage of the tyre before purchasing it. If you are not confident in fitting tyres yourself, take them to a professional tyre fitter. And remember to check the tyre pressure regularly after installation.